Skip to content
If you are uncomfortable performing this update yourself, please contact your local authorized service provider. Improper flashing can void warranties and damage the device.
Press and hold the and Station 2 buttons simultaneously. Turn on the power switch while holding the buttons.
The process usually involves connecting the printer via a USB or RS232 serial interface and using a specific firmware uploader tool provided in the service manual. According to the PR2 Plus Service Manual Olivetti Pr2 Plus Firmware Update
Follow these steps carefully to flash the new firmware onto your Olivetti PR2 Plus. Step 1: Put the Printer into Boot Mode Power off the printer. Disconnect the communication cable from the PC temporarily.
Firmware updates often contain patches for known bugs, such as "station not ready" errors or failures to respond to commands. Feature Enhancement: If you are uncomfortable performing this update yourself,
The PR2 PLUS can be connected to a computer using various interfaces: serial, parallel, or USB. Ensure the correct cable is connected to the connector at the back of the machine.
Click the , Write , or Start button in the utility interface. Turn on the power switch while holding the buttons
turn off the printer or disconnect the USB cable during this time. Step 5: Complete and Restart
: Power cycle the printer and restart the process from step 1.