Reset - Konica Minolta Bizhub C258 Factory

Reconfigure the static IP address, subnet mask, and gateway via the network settings.

Clearing persistent configuration errors or network issues that cannot be resolved via standard settings.

When the bizhub C258 finishes booting post-reset, it will present the initial setup wizard on the screen.

If you only need to reset network settings or the controller, use the Administrator Mode button on the control panel. Administrator Settings and enter the admin password (default is typically Navigate to Maintenance Network Setting Clear (to reset IP/network info) or (to restart the controller). konica minolta bizhub c258 factory reset

Turn off the main power switch, wait 10 seconds, and turn the machine back on. Method 2: The Service Mode Reset (Hard Reset)

If you encounter any issues during or after the factory reset process, refer to the following common issues and solutions:

If your machine is stuck on a specific error code (like a "C" code) and won't boot, use the physical reset button method. www.bluebox.co.uk Turn the main power (switch located inside the front door). Press and hold the Yellow Reset Button on the control panel. While holding the button, turn the power Keep holding until a Reconfigure the static IP address, subnet mask, and

The following steps, based on this YouTube tutorial , use the Service Mode/Service Mode-like interface to clear settings without removing the meter count. 1. Access the Initialization Menu On the control panel, press the button. Press [Stop] →right arrow [0] →right arrow [0] →right arrow [Stop] →right arrow [0] →right arrow [1] .

A factory reset on a Konica Minolta bizhub C258 is a powerful tool for clearing data before decommissioning, resolving persistent software glitches, or wiping custom network configurations. There are several ways to reset the device depending on your goal, ranging from simple network wipes to full "initialization" through the service menu. Option 1: The "Full Initialization" (Service Mode)

Note your static IP, Gateway, and DNS settings. If you only need to reset network settings

Are you trying to clear an , or wiping data to sell the machine ?

Konica Minolta's embedded web server, , provides a remote interface for managing the device, which can be easier for IT administrators.