On a phone or computer, open Wi-Fi settings and connect to the network named ADC-V724 (XX:XX:XX) , where the last digits are the MAC address found on the camera packaging.
Wait about two minutes for the internal system to boot. The status LED should begin to blink white. If it does not, press and hold the (located under the screwed-down cover on the bottom of the camera) for roughly 6 seconds until it flashes white. 3. Connect to the Temporary Local Network Http V724install
Now that your camera is configured, you can mount it in its permanent location. On a phone or computer, open Wi-Fi settings
: The address must be typed exactly as http://v724install . Do not add "www," do not change the capitalization, and do not add any extra characters. If it does not, press and hold the
: Your Alarm.com ADC-V724 camera and its included AC power adapter.
After a successful , basic configuration is mandatory to avoid default security loopholes.
Web administrators often spot this string in HTTP POST or GET requests. Automated bots frequently scan the internet for setup files like v724install to exploit unpatched applications. 3. Failed Local Installations