Open the configuration properties of your dimmer or relay module. Go to the tab. Select a Scene Number (e.g., Scene 1: "Dinner Party").
Adjust specific hardware safety profiles, such as dimming thresholds or Power-on State (Earthquake/Recovery state restoring previous levels). Step 3: Scene and Sequence Programming
+-----------------+ Ethernet +-------------------+ 4-Core Cable +------------------+ | Programming | -------------------> | HDL IP Gateway | -----------------------> | Buspro Modules | | PC (Tool 2) | | (e.g., MBUS01IP) | | (Dimmers, Relays)| +-----------------+ +-------------------+ +------------------+ IP Address Configuration
To connect your PC to the physical Buspro network, you need an IP gateway (such as the HDL MBUS IP Gateway). Your computer and the gateway must reside on the same local area network (LAN) subnet. Step 1: System Requirements and Installation hdl buspro setup tool 2
: Creating a residence list and binding the MAC address of the IP module.
Link the button to a target module. Enter the Subnet ID, Device ID of the Relay/Dimmer, the Channel Number, and the desired intensity/state.
HDL has confirmed that while the mobile apps evolve, the Windows Setup Tool will continue to receive support for hardware-level configuration because wireless apps cannot handle low-level RS-485 addressing. Open the configuration properties of your dimmer or
: Ensure the local and target ports match the HDL standard (typically 28930 ). 3. Core Interface and Architecture
Set your local network adapter to 192.168.1.X (where X is any number between 2 and 249) with a subnet mask of 255.255.255.0 . Configuring Software Connection Settings Open Buspro Setup Tool 2. Navigate to the connection or network settings panel.
An RJ45 Ethernet port or a reliable Wi-Fi connection on the same local area network (LAN) as the Buspro gateway. Adjust specific hardware safety profiles, such as dimming
Set up . For instance: If Lux < 200 AND Motion is Detected, then trigger Subnet 1, Device 10 (Kitchen Light) to ON.
Turn on, turn off, dim up, dim down, or trigger sequences. 🚀 Step-by-Step Programming Guide
Define static lighting looks across an entire room. Setup Tool 2 allows you to save up to 12 or 24 scenes per actuator.