Equatech Universal Tv Wall Mount 32 To 100 Instructions Page

Before you begin mounting, it is essential to prepare your workspace and ensure you have all the necessary tools and hardware. Essential Tools

Mounting your television clears up media console space and creates a clean, cinematic look in your living room. The Equatech Universal TV Wall Mount is engineered to support flat and curved screens ranging from 32 inches up to a massive 100 inches.

Two vertical bars that attach to the back of your television.

Use an electronic stud finder to locate two adjacent wood studs in your desired mounting area.

Drill holes using a 3/8" masonry drill bit. Ensure you match the exact depth of the included plastic concrete expansion wall anchors. equatech universal tv wall mount 32 to 100 instructions

If your TV has a curved rear casing, a bump out at the bottom, or deeply recessed holes, place plastic spacers between the TV bracket and the television body. This creates a flat plane and provides adequate clearance.

Equatech Universal TV Wall Mount (32"–100") is a heavy-duty, space-saving bracket designed to support most plasma, LCD, and LED widescreen TVs weighing up to 55kg (121 lbs)

Lift the TV and align the hooks on the back of the mounting arms with the top rail of the wall plate. Slowly lower the TV until the hooks catch securely.

Because a 100-inch television can weigh significantly more than smaller variants, Do not attempt to lift a large screen onto the mount alone. Before you begin mounting, it is essential to

Lifting a large display requires caution. Do not attempt this step alone if you are managing a mid-to-large-size television panel.

Use the built-in tilt adjustment (if applicable) by loosening the tilt bolts, setting the angle, then re-tightening.

Most Equatech mounts have or security bolts at the bottom of the brackets. Install these to prevent the TV from being lifted off accidentally.

For large TVs (up to 100 inches), it is to secure the mount into wooden wall studs rather than just drywall. Two vertical bars that attach to the back of your television

Summary

: Lay your TV face down on a soft surface like a rug or bed to avoid scratches while attaching the brackets. Step-by-Step Installation Instructions 1. Attach Brackets to the TV

For tightening the heavy-duty lag bolts. Tape measure and pencil: For precise placement. Step 1: Mounting Brackets to the TV DIY - How To Install a TV Wall Mount