Canon Printer Service Tool V3600 Jun 2026

This specific function is essentially a "life-saver" for printers that have reached their pre-programmed print limit, as it clears the 5B00 error

Clears the internal memory that tracks ink overflow.

Write a on how to physically clean the ink pads?

your printer, but leave it plugged into the power outlet.

When these errors occur, the printer locks itself and refuses to print to prevent ink from leaking onto your desk. The V3600 tool is required to clear these software locks after the physical pads are serviced. Supported Canon Printer Models Canon Printer Service Tool V3600

the printer but keep the power cable plugged into the wall.

If your computer won't talk to the printer, I can help you fix while in Service Mode.

Sets the waste ink counter back to 0%.

While holding Power, press the Stop/Reset button exactly 5 times. The LED light will alternate between green and orange with each press. This specific function is essentially a "life-saver" for

Service Tools for Canon Printers | Page 3 | PrinterKnowledge

Service Tool V3600 is compatible with specific legacy hardware series. Using it on newer models can cause firmware corruption. iP2770, iP3600, iP4600, iP4700, iP4870. Pixma MP Series: MP230, MP250, MP270, MP280, MP480, MP490.

Note: For newer G-series mega-tank printers or modern TS-series models, higher versions of the Service Tool (such as V5103 or V5302) are usually required. Step-by-Step Guide: How to Use Service Tool V3600

The service tools might get EEPROM info from these printers for instance for checking if the printer is still in warranty. PrinterKnowledge When these errors occur, the printer locks itself

A computer running Windows (Windows XP, 7, 8, 10, or 11). The tool does not run natively on macOS.

While still holding Stop/Reset, press and hold the Power button. The green power light should turn on.

The Canon Printer Service Tool V3600 is a software application that allows technicians to access and control various aspects of Canon printers. It is designed to work with a range of Canon printer models, including those in the PIXMA, imageCLASS, and LBP series. This tool provides a comprehensive set of features and functions that enable technicians to perform advanced troubleshooting, maintenance, and repair tasks.

While continuing to hold the Power button, release the Stop/Reset button. Then, press the Stop/Reset button 5 consecutive times. Release Power: Release the Power button.